Why does my earphones keep breaking

Even a light rain shower can affect how some earphones work. You might also be surprised to know that by adding a pair of sweat-proof covers , you can wear over-ear and on-ear headphones during your workout. Sennheiser, for example, offers a warranty on their headphones as do others so if they break earlier you can get a replacement pair.

Some earphones come with inexplicably long wires that only make it easier for things to catch on them. Earbuds can break for any number of reasons. Carelessness is one of the biggest causes. Close menu. Headphones and Covers. All Headphone Covers.

All Sweatproof Plain Patterned. All Fluffy. All headphones. Just Launched. Shorts Leggings. Coats and Jackets. After clipping the wire, go ahead and throw it away. Using the soldering iron, heat the old solder that is on the contacts within the headphones circuitry until it begins bubbling. Be sure to repeat this step on all of the contacts within the headphones. After heating all of the contacts, you need to use the solder remover to get rid of the solder on the contacts.

You will need to do this as you are going to be placing some new solder on these contacts once the time is right. Now you will need to take the new cable and prepare it to replace the old one that was in the headphones before. With the clippers, clip off one end of the cable at one of the jacks that are for plugging the headphones in an auxiliary port. You will need to use the wire stripper to strip the outer casing of the wire to expose its internal wires.

There should be 2 sets of wires inside of the headphone cables. There will be two different colors that you will see, and they should be red or green, and the other cable will be copper. Carefully separate these two wire strands from each other and then twist them together.

The red or green coloration on the wires are used to insulate them. Remember when I suggested you take a picture of the internal circuitry of the headphones after disassembly? This is where that was important. With the picture that you had taken earlier, you will need to match the colored wires red and green to their respective positions as they were when you first took apart the headphones.

Here you will need to solder the appropriate wire to the appropriate contact in the photo. After this, you can move onto putting the headphones back together. Now that your headphones are working. It is time to put on the finishing touches and put them back together. This is where you use the self-setting rubber to start securing the cable to the headphones. Use the self-setting rubber to attach the new cable to the headphones, so it is securely locked into place.

For added wire security, make sure to use the self-setting rubber to join the wire where it meets the body of the headphones. This will keep the cable from becoming loose and reduce the risk of the cable becoming damaged later by being firmly in place. To reassemble the headphones from here, just place the headphones back together and put the screws back into place and screw them securely in place.

Do not screw them so tight that it is difficult to remove them later. If the screws are too tight, you could possibly have stripped them and cause more damage to the insides of the headphones again. After this, test the headphones to ensure that they are still working. If they are working, as they should be, you can go ahead and reassemble the headphones in the reverse order of which you took them apart.

When it comes to being able to extend the life of your headphones and keep them in the best shape possible, try to treat them like you would your dream car.

That might sound crazy, but you are going to do things like keep the car clean, keep it in the garage, and make sure all the gauges are working properly. Treat the headphones with the same care by following the tips below:. This keeps them functioning at their top performance and also prevents the build-up of bacteria that can occur when wearing your headphones. Not only can this damage the headphones, but it can also affect your ears and health so keep them clean.

This can apply to headphones as well and goes to keeping them clean. Sharing your earbuds or headphones with someone else can lead to whatever bacteria they have in their ears affecting you. If you decide to allow someone else to use your headphones, be sure to clean them immediately before use. Hopefully, this addresses your questions on whether you can save your headphones from the fate of the recycling bin and helps you feel more comfortable in your ability to fix these problems yourself.

Try to study up a little about repairing electronics and from here on out it should be a breeze! As you can see, I love my headphones! Many users disconnect their earbuds from input devices by tugging on the cord.

Others, though, forget that they are wearing a pair while using them. When they step away from their computer or rush to get the door, their earbuds are ripped out of their ears.

Yanking your earphones out puts a lot of stress on the connection points near the earpieces and the input plug and the internal wires. This can eventually lead to metal fatigue or cause stress fractures to form along the wires. But leaving earbuds like this puts unnecessary stress on the wires, especially when the same sections are bent multiple times. Even worse, earphones with long cords can sustain further damage when chairs roll over them or as people walk or step on them.

All these factors can eventually result in metal fatigue or stress fractures forming along the internal wires. There are several easy measures you can take to keep your earphone cords from being bent or crushed under your feet or furniture. These include:. Properly coiling earphone cords may feel like a lot of work at first.

But once you develop this habit, doing so becomes automatic. Noise-cancelling earphones can result in other unforeseen circumstances, like missing sirens or alarms that could signal warnings or danger. A dedicated storage protects your earphones from getting squashed while you travel. High-quality earbuds often come with hard-cover cases like the FiiO HB1 or soft-cover pouches. These keep your earphones safe while untangled , and prevent them from pressing up against other belongings.

While this technique makes your earphones look organized and knot-free, it also causes devices to break much faster. The tight loops and frequent bending on the same segments of the cord can cause tiny splits to form on the internal wires.

These parts are usually damaged when constantly subjected to high volumes or exposed to moisture. Regularly using your earphones to listen to loud music will quickly degrade the intricate internal pieces. Earbuds get exposed to moisture when you sweat during workouts or while wearing a helmet, cap, or beanie. The good news is that caring for your earphones does not require major investments in time and effort.

Learning some simple care habits or using affordable accessories can go a long way in making your earbuds last through more travels, exercise sessions, and work days.